March 11, 2017 Celeste Monforton, DrPH, MPH 1Comment

Rick Simer’s work-related death could have been prevented. That’s how I see OSHA’s findings in the agency’s recent citations against K.B.P. Coil Coaters, Inc.

The 64 year-old was working in August 2016 when he was killed on the job. The initial press report by the Denver Post indicated that Mr. Simer was “caught in an aluminum splitter machine.” I  wrote about the incident shortly after it occurred.

OSHA completed its post-fatality inspection and recently issued citations to K.B.P. Coil Coaters. OSHA found that the company violated safety regulations for lockout/tagout procedures (1910.147) as well as for machine guarding (1910.212). This included:

“protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.” (1910.212)

K.B.P. Coaters agreed to correct these safety problems by mid-April and is paying off a $24,000 penalty in installments. The fatality involving Rick Simer was one of about 80 fatalities in Colorado investigated last year by OSHA.

When some local press initially reported Rick Simer’s death, they called it an accident. An “accident” suggests the circumstances were unforeseen or could not have been avoided. OSHA’s findings tell a different story. Call it cutting corners, call it poor management, call it breaking the law. Whatever you want to call it, Felton’s work-related death could have been prevented, it was no “accident.”

One thought on “Fatal work injury that killed Rick Simer, 64, was preventable, OSHA cites K.B.P. Coil Coaters

  1. Rick Simer was my brother. It has been 5 years and we still miss him everyday. Rick was a very kind simple person. He was a Vietnam vet in the Air Force and experienced so much trauma from that period of time. He was thoughtful and loved his family very much. He was not high when the accident occurred. Rick had worked for that company for 5-6 years. He was not a newcomer. He had just taken shift when he was pulled into that machine losing his life. He was a seasoned employee and did his job well. The lack of safety on the job is what caused his death and could have been prevented if safety from the company was in place. The thc in his system was not the cause of his death. The lack of safety for the companies employees was the cause of his death! Rick was a very good man with a beautiful soul . His service to our country did not come without wounds that would last his lifetime. People need to quit pointing fingers at a man that was just doing his job and it was dangerous. Rip my brother we love and miss you so much! Will see you in heaven…. Your sister Barb

Leave a Reply to Barbara Harner Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.